We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471317115
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7471317115, catch up with FAMAGA, the world's chief retailer of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are symbolized in the quality of products and particular attention to each user. We esteem everyone, who liased with us - so, our regular buyers bring in the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such clients, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the earth Germany, United Kingdom, Bangladesh, Yemen, Ghana, Dominica, Botswana, Oman, North Korea, Syria, Malta, Colombia, Finland, Philippines, Mozambique, Albania, New Zealand, Suriname, Lithuania, Hungary, Nicaragua, Morocco, Liechtenstein, Vietnam, Qatar, Kazakhstan, Norway, China, Zimbabwe, United States, Ireland, Bosnia and Herzegovina, East Timor, Kenya, Russia, United Arab Emirates, Swaziland, Indonesia, The Gambia, Comoros, Belarus, Madagascar, Cyprus. A well-developed logistics series and a partnership network allow us to send our products anywhere in the planet quickly without discrediting product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as to stay on the top.
To get some advice or order, get in touch with us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |