We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000317
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R402000317, call FAMAGA, the world's top vendor of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of items and particular attention to each purchaser. We understand everyone, who conspired with us - therefore, our regular customers receive the most acceptable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Chad, Colombia, Papua New Guinea, Gambia, Palestine, Dominican Republic, Uruguay, Norway, Egypt, Russia, Guatemala, Iran, Brazil, Burma, Japan, Thailand, Burundi, Jordan, Nepal, Uzbekistan, Zimbabwe, Mongolia, Tunisia, Peru, Kyrgyzstan, Chile, Azerbaijan, Belize, Mozambique, Kazakhstan, Switzerland, India, Uganda, Bangladesh, Iceland, Macedonia, Seychelles, Lithuania, Rwanda, Malaysia, Tonga, Namibia, Cameroon, Iraq, Denmark, Hungary. A advanced logistics chains and a partnership network assist us to ship our goods anywhere in the world as soon as possible without undermining product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that users choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |