We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061006
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 100 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822061006, make contact with FAMAGA, the world's central retailer of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of items and private attention to each buyer. We respect everyone, who cooperated with us - thus, our regular consumers bring in the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Cape Verde, Cuba, Eswatini, Andorra, Guinea-Bissau, Luxembourg, Cyprus, Malta, Turkmenistan, Seychelles, Algeria, Equatorial Guinea, Malawi, Fiji, Mauritius, Armenia, South Sudan, Botswana, Benin, Angola, Serbia, Vietnam, Swaziland, Ireland, Thailand, Liberia, Zimbabwe, Finland, Pakistan, Guyana, Libya, Madagascar, Kenya, Togo, Yemen, Afghanistan, El Salvador, Morocco, Ecuador, Chile, Belarus, Dominica, Guatemala, Greece, South Korea, Tajikistan. A well-built logistics chains and a partnership network allow us to conduct our items anywhere in the planet on-time without damaging product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or book, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |