We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177044
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 50.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480177044, make contact with FAMAGA, the world's influential company of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each purchaser. We praise everyone, who engaged with us - so, our regular purchasers receive the most desirable purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Mongolia, Belgium, Bolivia, Vietnam, Zambia, Norway, Cyprus, Russia, Kazakhstan, Congo, Tajikistan, Monaco, Burundi, Sierra Leone, Peru, Jordan, Brazil, Niger, Cameroon, Lithuania, Macedonia, New Zealand, Chile, Suriname, Nicaragua, Liberia, Namibia, Moldova, Ecuador, Latvia, Turkey, China, Armenia, Australia, Bulgaria, Tunisia, Uganda, The Gambia, Poland, Kyrgyzstan, Equatorial Guinea, Hungary, United States, Libya, Philippines. A well-developed logistics connection and a partnership network allow us to conduct our elements anywhere in the earth on-time without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or order, phone us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |