We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177155
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 127 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480177155, catch up with FAMAGA, the world's primary supplier of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of merchandises and private attention to each client. We esteem everyone, who conspired with us - so, our regular consumers pick up the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Egypt, The Bahamas, Lithuania, Laos, Belarus, Albania, Nigeria, Denmark, Sweden, Canada, Oman, Netherlands, Tunisia, United Arab Emirates, Liberia, Slovakia, Vietnam, Mexico, Afghanistan, Togo, Burkina Faso, Pakistan, Singapore, Uzbekistan, Madagascar, Eritrea, Georgia, Mozambique, Comoros, Cyprus, Central African Republic, Costa Rica, Namibia, United States, Tajikistan, East Timor, Bolivia, El Salvador, Norway, Philippines, Turkey, Swaziland, North Korea, Indonesia, Libya, Nepal, Macedonia. A well-shaped logistics connection and a partnership network guide us to ship our products anywhere in the planet quickly without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |