We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472023994
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7472023994, contact FAMAGA, the world's primary distributor of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are portrayed in the quality of products and particular attention to each orderer. We esteem everyone, who conspired with us - hence, our regular purchasers accept the most acceptable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Mauritania, Guyana, Greece, Zambia, Burkina Faso, Finland, Iceland, Eswatini, Dominica, Oman, Singapore, Japan, Cameroon, Vietnam, Gambia, Chile, Switzerland, Afghanistan, Latvia, Djibouti, South Korea, Botswana, Romania, Indonesia, Netherlands, Jamaica, Seychelles, Mexico, Panama, Uganda, Haiti, Argentina, Ireland, Turkmenistan, Mauritius, Togo, Angola, Kenya, Croatia, Thailand, Kuwait, Tonga, Brunei, Paraguay, Morocco, Kiribati. A well-shaped logistics network and a partnership network help us to deliver our products anywhere in the globe as soon as possible without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |