We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344004
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822344004, get in touch with FAMAGA, the world's influential vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each purchaser. We value everyone, who collaborated with us - therefore, our regular customers procure the most flexible purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such customers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Poland, Brazil, Paraguay, Azerbaijan, Guatemala, Egypt, Belize, Iceland, Myanmar, The Gambia, Ecuador, Uruguay, Philippines, Lebanon, Iran, Haiti, Sierra Leone, Brunei, Andorra, Macedonia, Liberia, Vietnam, Burundi, Mali, Chad, Uzbekistan, Belarus, United Arab Emirates, Uganda, Sudan, Laos, Latvia, Moldova, Kazakhstan, Kiribati, Togo, Rwanda, China, Armenia, Libya, India, Switzerland, Lithuania, Australia. A advanced logistics system and a partnership network allow us to send our goods anywhere in the planet on-time without undermining product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |