We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480041461
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480041461, reach FAMAGA, the world's the best company of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each purchaser. We appreciate everyone, who engaged with us - hence, our regular purchasers procure the most desirable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Spain, Equatorial Guinea, Lithuania, Costa Rica, Belgium, Haiti, Mali, Congo, Turkey, Andorra, United States, Greece, South Sudan, Egypt, Chad, Russia, Denmark, Tanzania, North Korea, Ecuador, Israel, Kazakhstan, Nigeria, Seychelles, Namibia, Central African Republic, Armenia, Mongolia, Tajikistan, Azerbaijan, Mozambique, Bolivia, Kiribati, Iran, Cameroon, Sudan, Ghana, Afghanistan, Burundi, Madagascar, Bulgaria, Philippines, Montenegro, Comoros, New Zealand, Cape Verde. A well-built logistics connection and a partnership network allow us to ship our products anywhere in the globe promptly without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |