We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013697
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412013697, call FAMAGA, the world's primary provider of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are portrayed in the quality of goods and particular attention to each purchaser. We value everyone, who conspired with us - therefore, our regular clients procure the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Lesotho, Brazil, Bahrain, Burma, Guinea-Bissau, Slovakia, France, Lebanon, Honduras, Dominican Republic, Lithuania, Brunei, China, Turkey, Sweden, Romania, Ecuador, Sierra Leone, India, Pakistan, Tonga, Kiribati, Niger, Turkmenistan, Jamaica, Tunisia, Finland, Laos, Iraq, Gambia, Hungary, Ukraine, Tajikistan, Azerbaijan, Egypt, Moldova, Bangladesh, Costa Rica, Chile, Sudan, Czech Republic, Austria, Antigua and Barbuda, Ghana, Paraguay, Central African Republic, Mongolia. A well-built logistics network and a partnership network allow us to conduct our goods anywhere in the earth on-time without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is amounting every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To request or make a request, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |