We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414000777
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | 0.04 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R414000777, communicate with FAMAGA, the world's principle company of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each orderer. We cherish everyone, who joined with us - so, our regular purchasers get the most favorable purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Bahrain, Swaziland, Montenegro, East Timor, Djibouti, Morocco, Italy, Syria, Bangladesh, Cuba, Iran, Vietnam, Egypt, Croatia, Poland, Eritrea, Uruguay, Panama, Estonia, Namibia, Jordan, Japan, Albania, Peru, Iraq, The Bahamas, Israel, Latvia, Kiribati, Finland, Liechtenstein, South Korea, Belarus, Sierra Leone, Kuwait, Belize, Comoros, Paraguay, Angola, Senegal, Nepal, Tanzania, Sweden, Australia, Jamaica, Slovakia. A well-elaborated logistics connection and a partnership network assist us to ship our items anywhere in the world quickly without discrediting product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that users choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |