We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627653
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 250 mm |
Piston rod thread | M42x2 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627653, communicate with FAMAGA, the world's primary retailer of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each client. We cherish everyone, who conspired with us - thus, our regular consumers get the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Congo, Sri Lanka, Romania, Cuba, Poland, Burma, Russia, Saudi Arabia, Japan, Oman, Mauritania, Sweden, Botswana, Costa Rica, Belgium, Guatemala, Comoros, Thailand, Angola, Laos, Madagascar, Latvia, Panama, Togo, Sudan, Guyana, Kyrgyzstan, Indonesia, India, Mauritius, Syria, Djibouti, Iceland, Tajikistan, Bosnia and Herzegovina, Peru, Philippines, Cyprus, Slovakia, Switzerland, United Arab Emirates, Samoa, Central African Republic. A well-shaped logistics connection and a partnership network guide us to ship our goods anywhere in the planet promptly without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |