We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009198
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412009198, connect FAMAGA, the world's main producer of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each consumer. We esteem everyone, who worked with us - so, our regular buyers obtain the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Dominican Republic, Uruguay, Sri Lanka, Sudan, Botswana, Cambodia, Netherlands, Belgium, Oman, Fiji, Colombia, Guatemala, Sweden, Benin, Guinea, Croatia, China, The Gambia, Egypt, Singapore, Monaco, Bulgaria, Romania, United States, Estonia, Austria, Gambia, The Bahamas, Nicaragua, Philippines, Senegal, Suriname, Mongolia, Serbia, Bangladesh, Mauritania, Burkina Faso, Zimbabwe, Madagascar, Kuwait, Vietnam, Syria, Dominica, Cyprus, Seychelles. A well-built logistics bond and a partnership network assist us to deliver our elements anywhere in the globe with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |