We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822243404
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822243404, get in touch with FAMAGA, the world's the best supplier of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each buyer. We value everyone, who collaborated with us - therefore, our regular customers pick up the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Guinea-Bissau, South Africa, Grenada, France, Czech Republic, Singapore, Guyana, Ecuador, Turkmenistan, Kazakhstan, Slovenia, Palestine, Libya, Saudi Arabia, South Sudan, India, Argentina, Kenya, Ghana, Belize, Cameroon, Mauritius, Burundi, Paraguay, Brazil, Sweden, Tonga, Kiribati, Costa Rica, Liechtenstein, Mauritania, Slovakia, Antigua and Barbuda, Montenegro, Senegal, Andorra, Bangladesh, Sierra Leone, Zambia, Malta, Philippines, Iceland, Australia. A well-elaborated logistics chains and a partnership network guide us to deliver our items anywhere in the globe as soon as possible without disreputing product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |