We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009659
Description
Number of valve positions | 1 |
Sealing material | Nitrile rubber |
Subbase | Aluminum |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | G 1/2 |
Compressed air connection output | Ø 10 |
Type | Base plate for a single or double solenoid valve |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412009659, catch up with FAMAGA, the world's principle supplier of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each purchaser. We value everyone, who cooperated with us - so, our regular customers obtain the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Portugal, Italy, Netherlands, Mexico, Saudi Arabia, South Sudan, Indonesia, Honduras, Afghanistan, Monaco, Burundi, Slovenia, Luxembourg, Guatemala, Djibouti, Burma, Brunei, The Gambia, Malaysia, Iraq, Georgia, Latvia, Mauritania, Bangladesh, Panama, Estonia, Sierra Leone, Russia, Israel, Burkina Faso, Azerbaijan, Philippines, Yemen, Kuwait, United Arab Emirates, Costa Rica, Angola, Pakistan, Qatar, Tonga, Albania, Sweden. A well-elaborated logistics connection and a partnership network assist us to conduct our products anywhere in the globe immediately without disreputing product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or book, phone us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Nominal flow Qn | 1400 l/min |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Grid dimension | 19,8 mm |
Exhaust (3,5) | With directional exhaust (3/5) |
Exhaust type | Ports separated |
Tightening torque for mounting screws | 1,1 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The internal and external pneumatic pilots can be adjusted using the change-over plate on the left end plate. For internal pilot, working pressure is limited to 2.5 bar ... 10 bar . |
Material |
---|
Base plate | Aluminum |
push-in fitting | Brass, nickel-plated |
Seal | Nitrile rubber |