We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480193173
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480193173, reach FAMAGA, the world's dominant vendor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each purchaser. We admire everyone, who worked with us - so, our regular clients accept the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, New Zealand, China, Morocco, Guinea-Bissau, Botswana, Sri Lanka, Japan, Mexico, Malawi, El Salvador, Bhutan, Burkina Faso, Costa Rica, Chile, Honduras, Monaco, Samoa, Eswatini, Jamaica, Mauritius, Jordan, Uruguay, Mauritania, Swaziland, Cyprus, Panama, Iran, Moldova, Seychelles, Ukraine, Finland, Ecuador, Afghanistan, Philippines, Tajikistan, Kenya, East Timor, Algeria, Serbia, Croatia, Vietnam, Kyrgyzstan, Luxembourg, South Korea, Malaysia. A advanced logistics network and a partnership network allow us to conduct our products anywhere in the earth immediately without undermining product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |