We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822242410
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822242410, reach FAMAGA, the world's major vendor of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each customer. We understand everyone, who liased with us - therefore, our regular buyers procure the most flexible purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Mauritius, Laos, Sudan, Slovakia, Palestine, Azerbaijan, Senegal, Guyana, Malta, Monaco, Paraguay, Myanmar, Seychelles, Saudi Arabia, Ecuador, Brazil, Djibouti, Guinea, Denmark, Oman, Malaysia, Costa Rica, Czech Republic, Central African Republic, Ukraine, Macedonia, Syria, Burkina Faso, Montenegro, Luxembourg, Moldova, Jamaica, Turkey, Eswatini, Jordan, Estonia, Bosnia and Herzegovina, Burundi, Mali, Tanzania, India, Latvia, Greece, Austria, Norway. A well-elaborated logistics link and a partnership network let us to send our units anywhere in the globe with no delay without damaging product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |