We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396608
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822396608, connect FAMAGA, the world's foremost company of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each orderer. We respect everyone, who worked with us - hence, our regular customers obtain the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Albania, Denmark, Guinea-Bissau, Eritrea, Rwanda, Afghanistan, Croatia, Brazil, Tonga, Iran, Mauritania, Chad, Jamaica, Saudi Arabia, United States, Paraguay, Haiti, Romania, Latvia, Monaco, Malawi, Guatemala, Kazakhstan, Finland, Swaziland, Mexico, Bulgaria, Namibia, Mozambique, Ukraine, Burundi, Qatar, Brunei, Yemen, United Arab Emirates, Georgia, Mongolia, Angola, Philippines, Egypt, Cape Verde, New Zealand, Burkina Faso, South Korea, Sweden, Samoa. A advanced logistics bond and a partnership network cheer us to deliver our items anywhere in the world on-time without undermining product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or place an order, contact us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |