We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340907
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822340907, communicate with FAMAGA, the world's top vendor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of products and private attention to each purchaser. We admire everyone, who collaborated with us - thus, our regular buyers pick up the most attractive purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such buyers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Honduras, Mexico, Bhutan, Turkmenistan, Laos, Singapore, Bolivia, Netherlands, Samoa, Cape Verde, Sudan, Eritrea, Bangladesh, Switzerland, Turkey, Dominica, Slovakia, Uganda, Djibouti, Liechtenstein, Russia, Comoros, Swaziland, Albania, United Arab Emirates, South Sudan, Croatia, Montenegro, Brunei, Eswatini, Georgia, Peru, The Gambia, North Korea, Belarus, Iceland, Benin, Syria, Seychelles, Paraguay, Costa Rica, Brazil. A well-developed logistics system and a partnership network help us to dispatch our items anywhere in the earth promptly without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are glad that users choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, phone us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |