We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822498300
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822498300, communicate with FAMAGA, the world's major company of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each orderer. We appreciate everyone, who engaged with us - thus, our regular clients receive the most convenient purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Qatar, San Marino, Eswatini, Armenia, Bulgaria, United Arab Emirates, Poland, Bolivia, Swaziland, Mexico, Switzerland, El Salvador, South Korea, The Bahamas, Bangladesh, Croatia, Seychelles, Netherlands, Nigeria, Peru, Liberia, Brunei, Belarus, United States, Chile, Pakistan, Indonesia, Samoa, Moldova, Mauritius, Ghana, Morocco, Kiribati, Angola, Georgia, Serbia, Central African Republic. A well-shaped logistics link and a partnership network cheer us to conduct our goods anywhere in the world on-time without damaging product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or make a request, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |