We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011195
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 5x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412011195, call FAMAGA, the world's main producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of products and particular attention to each consumer. We value everyone, who joined with us - so, our regular consumers obtain the most desirable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Benin, Guyana, Brazil, Czech Republic, Dominican Republic, Bahamas, Monaco, Papua New Guinea, Guatemala, Mauritius, Belarus, Oman, Tajikistan, Mauritania, Luxembourg, Gambia, East Timor, El Salvador, Pakistan, Netherlands, Tunisia, Haiti, United Arab Emirates, Philippines, Libya, Afghanistan, Norway, Liechtenstein, Qatar, Dominica, Fiji, Kuwait, Central African Republic, Brunei, Burundi, Indonesia, Iran, Angola, Cyprus, Rwanda, Serbia, Albania, Mexico, Bolivia. A well-built logistics link and a partnership network let us to conduct our goods anywhere in the planet with no delay without disreputing product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as to stay on the top.
To request or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |