We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013682
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412013682, get in touch with FAMAGA, the world's prime producer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and individual attention to each user. We respect everyone, who conspired with us - thus, our regular customers accept the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Haiti, Pakistan, Bosnia and Herzegovina, Singapore, Papua New Guinea, Gambia, Sri Lanka, Finland, Dominican Republic, Belgium, Cape Verde, Honduras, Morocco, Lithuania, Panama, Guatemala, Mauritius, Peru, Hungary, Afghanistan, South Korea, Russia, The Gambia, Ghana, Namibia, Seychelles, Kiribati, Benin, Cameroon, Switzerland, Estonia, Niger, China, Egypt, Comoros, Croatia, Suriname, Dominica, Vietnam, Indonesia. A well-shaped logistics system and a partnership network guide us to deliver our items anywhere in the world promptly without compromising product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To inquire or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |