We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010869
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 100 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822010869, communicate with FAMAGA, the world's leading producer of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each consumer. We cherish everyone, who joined with us - therefore, our regular buyers procure the most convenient purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Russia, Sudan, Cameroon, Malawi, Afghanistan, New Zealand, France, Uganda, Mongolia, Swaziland, United States, Belgium, Uzbekistan, Sierra Leone, Serbia, Israel, Guinea, Bhutan, Finland, Switzerland, Seychelles, Andorra, Laos, North Korea, Mauritania, Monaco, Azerbaijan, Australia, Namibia, Nigeria, Slovakia, Eswatini, Tajikistan, Ecuador, Guatemala, Greece, Senegal, Argentina, Burkina Faso, Jordan, Sweden, Burundi, Ireland, Kiribati, Iceland, Paraguay, Macedonia. A well-developed logistics bond and a partnership network assist us to conduct our units anywhere in the earth promptly without compromising product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |