We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670610000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 6431 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1670610000, call FAMAGA, the world's key vendor of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of products and personalseparate attention to each user. We value everyone, who worked with us - hence, our regular customers accept the most attractive purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such customers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Norway, Bahamas, Cape Verde, Georgia, Bangladesh, France, Lebanon, Burkina Faso, Bosnia and Herzegovina, Papua New Guinea, Kazakhstan, Fiji, Hungary, Kuwait, El Salvador, Angola, Kyrgyzstan, Mali, Uruguay, Peru, South Korea, Luxembourg, Senegal, North Korea, United Arab Emirates, The Bahamas, Mexico, Mauritania, Brunei, Finland, Qatar, Vietnam, Montenegro, Seychelles, Zimbabwe, Afghanistan, Thailand, Togo, Jamaica, Bolivia, Ghana, Ireland, Belarus, Dominica, United States. A well-developed logistics connection and a partnership network allow us to deliver our products anywhere in the globe with no delay without compromising product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this quantity is growing every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as to stay on the top.
To consult or book, get in touch with us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |