We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001600
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001600, contact FAMAGA, the world's principle supplier of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each client. We understand everyone, who worked with us - therefore, our regular consumers accept the most acceptable purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Iceland, Malawi, Botswana, Central African Republic, Burma, Papua New Guinea, Austria, Ecuador, The Bahamas, Samoa, Uruguay, Grenada, Sudan, Nigeria, Belarus, Algeria, Chad, Thailand, Jordan, Angola, Bulgaria, Zimbabwe, Montenegro, Russia, Turkmenistan, Slovakia, Kyrgyzstan, Mongolia, Belize, Kenya, Gambia, Dominica, Azerbaijan, Ghana, United Arab Emirates, North Korea, Argentina, Tanzania, Estonia, Seychelles, Iran, Cape Verde, Malta, Eswatini, Niger, Tonga. A well-elaborated logistics network and a partnership network allow us to deliver our units anywhere in the world on-time without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |