We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009658
Description
Number of valve positions | 1 |
Sealing material | Nitrile rubber |
Subbase | Aluminum |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | G 1/2 |
Compressed air connection output | Ø 10 |
Type | Base plate for a single or double solenoid valve |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412009658, contact FAMAGA, the world's chief company of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each buyer. We esteem everyone, who engaged with us - so, our regular clients get the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Mongolia, Netherlands, United States, Equatorial Guinea, Oman, Belize, Malta, Canada, Albania, Peru, Colombia, El Salvador, Eritrea, Nicaragua, Croatia, Singapore, Tunisia, Romania, China, New Zealand, Mauritius, Brazil, Afghanistan, Iceland, Macedonia, Ireland, Denmark, Serbia, Liechtenstein, South Korea, Egypt, Uganda, Mozambique, Brunei, Bolivia, Cameroon, Djibouti, Yemen, Burkina Faso, Paraguay, The Gambia, Czech Republic. A well-developed logistics chains and a partnership network assist us to ship our products anywhere in the globe immediately without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Nominal flow Qn | 1400 l/min |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Grid dimension | 19,8 mm |
Exhaust (3,5) | With directional exhaust (3/5) |
Exhaust type | Ports separated |
Tightening torque for mounting screws | 1,1 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The internal and external pneumatic pilots can be adjusted using the change-over plate on the left end plate. For internal pilot, working pressure is limited to 2.5 bar ... 10 bar . |
Material |
---|
Base plate | Aluminum |
push-in fitting | Brass, nickel-plated |
Seal | Nitrile rubber |