We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821303811
Description
Parts | Filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 40 µm |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 7200 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821303811, call FAMAGA, the world's principle company of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each orderer. We appreciate everyone, who collaborated with us - hence, our regular clients receive the most favorable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such buyers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Cape Verde, Singapore, Mali, Mauritius, Eritrea, Bhutan, Qatar, Paraguay, Saudi Arabia, Malaysia, Azerbaijan, Bangladesh, Madagascar, Ecuador, Argentina, El Salvador, The Gambia, Brazil, Uzbekistan, Angola, Brunei, Costa Rica, Suriname, Mauritania, Swaziland, Djibouti, Peru, Sudan, Sweden, Tanzania, Philippines, Poland, Comoros, Panama, Zimbabwe, Benin, Malta. A well-elaborated logistics chains and a partnership network assist us to conduct our units anywhere in the world with no delay without undermining product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as stay in control.
To ask a question or order, phone us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 125 cm³ |
Filter element | exchangeable |
filter porosity | 40 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Mounting with mounting bracket 1821336017. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |