We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1026200000
Description
Functional principle | double-acting |
Piston diameter | 113 mm |
Piston rod thread | M16 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1026200000, contact FAMAGA, the world's prime supplier of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of products and personalseparate attention to each user. We appreciate everyone, who engaged with us - therefore, our regular clients receive the most helpful purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Bahamas, Saudi Arabia, Myanmar, Albania, Kazakhstan, Comoros, Macedonia, Lebanon, Sierra Leone, Moldova, France, Norway, Burundi, Latvia, Iraq, Nepal, Ukraine, Nigeria, Liberia, Morocco, Malta, North Korea, Uruguay, Guyana, Uganda, Eswatini, Yemen, Central African Republic, Benin, Luxembourg, Israel, China, Slovakia, Switzerland, Greece, The Gambia, Andorra, Ghana, Paraguay, Belize, Thailand, Equatorial Guinea, Mali, Cape Verde, Brazil, Angola, New Zealand, Iceland, Costa Rica. A well-developed logistics network and a partnership network let us to conduct our units anywhere in the earth promptly without undermining product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Diaphragm actuator strokes are tolerance-dependent. Tolerance at 40 mm , 50 mm , 80 mm stroke: ± 3 mm |
Material |
---|
Cylinder tube | Steel |
Piston rod | Steel |
Front cover | Steel |
Seal | Acrylonitrile butadiene rubber |