We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822498203
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822498203, communicate with FAMAGA, the world's prime vendor of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each user. We understand everyone, who conspired with us - therefore, our regular clients accept the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Azerbaijan, Libya, Haiti, Sudan, Egypt, Burma, Gambia, Brunei, United States, China, Iraq, Fiji, Singapore, Guatemala, South Korea, Cyprus, Peru, Albania, Guyana, Tanzania, South Sudan, Botswana, Japan, Russia, Montenegro, Rwanda, Suriname, Chile, Kuwait, Moldova, Afghanistan, Armenia, Samoa, Zimbabwe, Mauritius, Djibouti, Angola, Eswatini, Latvia, Hungary, Yemen, India, Malaysia, Bolivia, Poland, Togo. A well-developed logistics series and a partnership network guide us to conduct our units anywhere in the world quickly without undermining product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or make a request, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |