We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821303713
Description
Parts | Filter |
Condensate drain | semi-automatic, open without pressure |
filter porosity | 5 µm |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1000 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0821303713, reach FAMAGA, the world's dominant provider of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each consumer. We cherish everyone, who conspired with us - hence, our regular purchasers procure the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Venezuela, Mauritania, Belgium, Belize, Guinea-Bissau, Mozambique, South Korea, Australia, Papua New Guinea, Algeria, Benin, Cuba, Latvia, El Salvador, Slovenia, Sweden, Hungary, Guinea, South Sudan, Kenya, Zimbabwe, Georgia, Eritrea, Nigeria, Cape Verde, Monaco, Seychelles, Suriname, Egypt, Swaziland, Ireland, Brunei, Botswana, Comoros, China, Finland, Iraq, Mauritius, Kiribati, The Gambia, Vietnam, Indonesia, Poland, Nepal, Serbia, United Arab Emirates, Armenia, Afghanistan, Iceland. A advanced logistics series and a partnership network help us to ship our goods anywhere in the world with no delay without damaging product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as stay in control.
To consult or make a request, phone us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 16 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Filter insert | Cellpor |