We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396603
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822396603, call FAMAGA, the world's key producer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each consumer. We understand everyone, who liased with us - so, our regular consumers bring in the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4500 such purchasers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Cameroon, Madagascar, Spain, Zimbabwe, Rwanda, Japan, Bhutan, Mali, Israel, Malta, Paraguay, Sierra Leone, Gambia, Palestine, Pakistan, Ghana, Burundi, India, Yemen, Algeria, Afghanistan, Azerbaijan, Belize, Senegal, Eritrea, Australia, Tonga, North Korea, Brunei, Central African Republic, United States, Albania, Libya, Peru, Czech Republic, Chile, United Arab Emirates, Uganda, Uruguay, Norway, Ecuador, Cyprus, Burkina Faso, Thailand, Luxembourg, Eswatini, Armenia, Kazakhstan, Mongolia. A well-elaborated logistics link and a partnership network assist us to dispatch our units anywhere in the globe quickly without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |