We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013678
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412013678, connect FAMAGA, the world's top supplier of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are outlined in the quality of products and personalseparate attention to each consumer. We understand everyone, who collaborated with us - thus, our regular buyers obtain the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Philippines, Montenegro, San Marino, Sierra Leone, Poland, Liberia, Singapore, Botswana, South Korea, Croatia, Mexico, Tajikistan, The Bahamas, Slovenia, Mali, Madagascar, Angola, Cape Verde, Turkey, Haiti, Kazakhstan, South Sudan, El Salvador, Yemen, Saudi Arabia, Morocco, Qatar, Malaysia, Senegal, Dominica, Moldova, Zambia, Comoros, Laos, Seychelles, Belarus, Tanzania, Syria, Sweden, Switzerland, Russia, Denmark, Israel, Kuwait, Iceland, United Arab Emirates, Estonia, Latvia, Peru. A advanced logistics link and a partnership network allow us to send our goods anywhere in the earth on-time without discrediting product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To consult or order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |