We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822242406
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822242406, get in touch with FAMAGA, the world's key supplier of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of merchandises and personalseparate attention to each consumer. We praise everyone, who worked with us - thus, our regular buyers receive the most convenient purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, United Arab Emirates, Australia, Bahamas, Dominican Republic, Latvia, Ecuador, The Bahamas, Mauritania, Afghanistan, Vietnam, Yemen, Canada, El Salvador, Slovakia, Nepal, Malaysia, Finland, Central African Republic, Romania, Thailand, Jamaica, Croatia, Sweden, Liechtenstein, Mauritius, Bolivia, Switzerland, Uruguay, Zimbabwe, Israel, Moldova, Brunei, Argentina, Indonesia, Comoros, India, Tajikistan, Haiti, Estonia, Philippines, Macedonia, Austria, Syria, Mali, China, Samoa, Kuwait, Benin. A well-elaborated logistics bond and a partnership network allow us to send our goods anywhere in the world on-time without damaging product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |