We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480041448
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480041448, get in touch with FAMAGA, the world's major retailer of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each consumer. We praise everyone, who liased with us - hence, our regular customers obtain the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Macedonia, Syria, Burma, Belgium, Turkey, Georgia, Kyrgyzstan, Senegal, Kiribati, New Zealand, Saudi Arabia, Cameroon, Poland, Uganda, Tanzania, Argentina, Costa Rica, Sweden, Andorra, Eswatini, Equatorial Guinea, Angola, Bosnia and Herzegovina, Armenia, India, Mauritius, Gambia, Comoros, Belarus, Australia, Mauritania, Iran, Montenegro, Peru, El Salvador, Ecuador, Zambia, Denmark, Luxembourg, Brunei, Iraq, Guatemala, Mongolia, Moldova, Central African Republic, Slovakia. A advanced logistics bond and a partnership network let us to deliver our goods anywhere in the globe as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |