We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001560
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001560, make contact with FAMAGA, the world's top distributor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each buyer. We value everyone, who liased with us - thus, our regular clients bring in the most favorable purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Peru, Bosnia and Herzegovina, Dominica, Denmark, Madagascar, Sweden, Albania, Costa Rica, Fiji, United Arab Emirates, Ghana, Tajikistan, Cape Verde, Burkina Faso, Singapore, Iraq, Togo, China, Eritrea, Tonga, Guyana, Samoa, Finland, Japan, El Salvador, Senegal, Paraguay, Mauritius, Libya, East Timor, Morocco, Argentina, North Korea, Philippines, Ireland, Djibouti, Mali, Uruguay, Jamaica, Kyrgyzstan, Benin, South Korea, Zimbabwe, Seychelles. A well-elaborated logistics link and a partnership network guide us to conduct our items anywhere in the world promptly without compromising product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, phone us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |