We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001510
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001510, catch up with FAMAGA, the world's primary supplier of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each user. We esteem everyone, who collaborated with us - thus, our regular customers get the most convenient purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Albania, Bahrain, Syria, Eswatini, Indonesia, Dominica, Finland, Haiti, South Sudan, Vietnam, Montenegro, Slovenia, Estonia, South Korea, Romania, Sierra Leone, Djibouti, Cape Verde, Netherlands, Andorra, Nicaragua, Pakistan, Samoa, Monaco, Angola, Turkey, Austria, Costa Rica, Paraguay, Mauritius, Suriname, Moldova, Tonga, Croatia, Guatemala, China, Namibia, Central African Republic, Philippines, Czech Republic, United States, Poland, Tajikistan, Comoros. A well-built logistics chains and a partnership network allow us to deliver our goods anywhere in the world immediately without discrediting product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |