We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821401164
Description
Operating mode | hold: spring force, release: compressed air |
Function type | Hold with clamping jaws |
suitable piston rod diameter | 10 mm |
Piston diameter | 25 mm |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821401164, make contact with FAMAGA, the world's leading producer of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each client. We admire everyone, who worked with us - thus, our regular clients procure the most flexible purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Fiji, Equatorial Guinea, Andorra, Indonesia, Congo, Portugal, Guyana, Philippines, Algeria, Gambia, Senegal, Belize, India, Denmark, Central African Republic, Monaco, Australia, Uruguay, Latvia, Brazil, Sierra Leone, Iraq, Namibia, North Korea, Zambia, Nigeria, Azerbaijan, Malta, Afghanistan, Paraguay, Angola, New Zealand, Ecuador, Slovakia, Greece, Libya, Tanzania, Antigua and Barbuda, United Arab Emirates, Israel, Togo. A advanced logistics bond and a partnership network let us to conduct our goods anywhere in the globe promptly without undermining product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Function | Hold with clamping jaws |
Release pressure | 4 ... 8 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Weight | 0,11 kg |
Warning: The holding unit may not be used for the following applications:1) for dynamic holding2) in or as safety equipment Holding unit may only be unlocked when turned off. Make sure that the load direction does not change during a holding interval. A change in the direction of force, as well as external forces such as impacts, strong vibrations, or torsional forces, will briefly release the piston rod and may destroy the HU1 holding unit. When clamped, there must be no residual pressure on the holding unit ( 0 bar ). Note:The minimum control pressure is >= the working pressure of the cylinder! |
Material |
---|
Housing | Aluminum, black anodized |