We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009221
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412009221, communicate with FAMAGA, the world's leading supplier of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We appreciate everyone, who cooperated with us - hence, our regular clients pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such clients, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cambodia, Kyrgyzstan, Namibia, Thailand, Turkey, Congo, Liechtenstein, Saudi Arabia, Japan, Ecuador, Bahamas, Burkina Faso, Romania, Tonga, Lebanon, Uruguay, Djibouti, Argentina, Switzerland, Yemen, Iceland, Mali, Mauritius, Samoa, Chile, Panama, Croatia, Zambia, Malaysia, Mongolia, El Salvador, Andorra, Bulgaria, Malta, Sudan, Jamaica, Czech Republic, Egypt, Senegal, Estonia, Eswatini, Nigeria, Montenegro, Lithuania. A well-developed logistics network and a partnership network allow us to conduct our products anywhere in the world immediately without discrediting product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate |
Protective guard | Polyamide |
Filter insert | Polyethylene |