We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627645
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 250 mm |
Piston rod thread | M42x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627645, reach FAMAGA, the world's major supplier of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of spare parts and private attention to each consumer. We admire everyone, who liased with us - therefore, our regular consumers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Lebanon, Bulgaria, Israel, Sudan, Bangladesh, Bhutan, Cameroon, Ecuador, El Salvador, North Korea, Romania, Latvia, Fiji, Macedonia, Sierra Leone, Finland, Rwanda, Serbia, Syria, Argentina, Hungary, Liberia, Mauritania, Austria, Cape Verde, Bolivia, Niger, Togo, Moldova, Qatar, Kiribati, Central African Republic, Kenya, Burundi, Vietnam, Senegal, Comoros, Uganda, Botswana, Armenia, Namibia, Uruguay, Slovakia. A well-shaped logistics link and a partnership network guide us to ship our products anywhere in the globe promptly without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, contact us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |