We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226602000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226602000, contact FAMAGA, the world's leading supplier of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each purchaser. We appreciate everyone, who engaged with us - therefore, our regular clients receive the most favorable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such clients, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Mauritania, Malta, Senegal, Portugal, Italy, Ghana, Burundi, Mexico, Lithuania, France, Bulgaria, Cameroon, Luxembourg, Bangladesh, Turkmenistan, Romania, Cyprus, Qatar, Paraguay, Madagascar, Armenia, Mali, Costa Rica, Benin, Kyrgyzstan, Togo, Brazil, Niger, Djibouti, Cape Verde, Chile, Switzerland, Sierra Leone, Laos, Albania, Algeria, Sweden, North Korea, Afghanistan, Hungary, Montenegro, Eswatini, New Zealand. A advanced logistics connection and a partnership network let us to ship our units anywhere in the world as soon as possible without compromising product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |