We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637930
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637930, catch up with FAMAGA, the world's top company of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each consumer. We admire everyone, who engaged with us - so, our regular customers receive the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Madagascar, Kiribati, Equatorial Guinea, Malawi, Romania, Uganda, Tanzania, Suriname, Burma, France, Israel, Colombia, Chad, Sudan, Macedonia, Guatemala, Oman, El Salvador, Guinea, Luxembourg, Estonia, New Zealand, Syria, Moldova, Kyrgyzstan, Liechtenstein, Azerbaijan, Seychelles, Thailand, Pakistan, Austria, Kazakhstan, Botswana, United States, Montenegro, Finland, Croatia, Chile, Belarus, North Korea, Jordan, India, Sweden, Bulgaria, Bangladesh, Mongolia, Georgia. A well-built logistics bond and a partnership network help us to send our products anywhere in the world as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this amount is ascending every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Please note that this variant does not use a scraper. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |