We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822065002
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822065002, connect FAMAGA, the world's principle supplier of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of products and private attention to each purchaser. We understand everyone, who worked with us - therefore, our regular buyers receive the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Côte d\'Ivoire, Mauritius, Colombia, Burma, Brazil, Saudi Arabia, Bosnia and Herzegovina, United Arab Emirates, Nigeria, Jamaica, Myanmar, Central African Republic, Paraguay, Burkina Faso, Haiti, Azerbaijan, Zimbabwe, Belize, Luxembourg, Eswatini, Ghana, Bulgaria, North Korea, Tonga, Kenya, Armenia, Namibia, Jordan, Tunisia, Egypt, Mongolia, Israel, Denmark, Croatia, Zambia, Sierra Leone, Uganda, Malta, Chile, Kiribati. A well-built logistics connection and a partnership network allow us to conduct our goods anywhere in the earth on-time without damaging product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |