We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013735
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412013735, reach FAMAGA, the world's primary provider of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are represented in the quality of spare parts and personalseparate attention to each consumer. We admire everyone, who conspired with us - so, our regular buyers obtain the most favorable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, France, Spain, Netherlands, Liberia, Kyrgyzstan, Azerbaijan, Burma, Cape Verde, Mali, United Arab Emirates, Grenada, Sierra Leone, Turkey, Afghanistan, Malawi, Cameroon, Chad, North Korea, Botswana, India, Australia, Uruguay, Kenya, Ukraine, Iceland, Greece, Hungary, Andorra, Eswatini, Seychelles, Argentina, Kazakhstan, Kiribati, Switzerland, Brazil, Croatia, Bosnia and Herzegovina, Norway, Paraguay, Zambia. A advanced logistics link and a partnership network let us to send our goods anywhere in the planet with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as keep on top of it.
To consult or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |