We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480163047
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480163047, call FAMAGA, the world's the best supplier of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of merchandises and private attention to each user. We praise everyone, who cooperated with us - therefore, our regular customers bring in the most desirable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such consumers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Myanmar, South Africa, Japan, Gambia, Czech Republic, Sri Lanka, Ecuador, Guinea, Estonia, Namibia, Vietnam, Malawi, Bosnia and Herzegovina, Thailand, Latvia, Saudi Arabia, Malta, Liberia, Tonga, Benin, Armenia, New Zealand, Central African Republic, Ukraine, Macedonia, Mongolia, Mali, Israel, Denmark, Tanzania, Comoros, Moldova, Ghana, India, Bolivia, Niger, Malaysia, Jordan, Kenya, Austria, Lithuania. A well-built logistics series and a partnership network allow us to dispatch our units anywhere in the earth on-time without damaging product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is growing every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |