We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226600650
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 65 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226600650, call FAMAGA, the world's key producer of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are symbolized in the quality of items and particular attention to each consumer. We respect everyone, who liased with us - thus, our regular consumers get the most flexible purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Azerbaijan, Russia, Madagascar, Bahamas, Palestine, Jamaica, Japan, Lithuania, Mauritania, India, Guyana, Oman, Dominica, Thailand, Nicaragua, United Arab Emirates, South Sudan, Switzerland, Chile, Finland, Mauritius, Haiti, Luxembourg, Serbia, Botswana, Egypt, Mexico, Togo, China, Bulgaria, Burkina Faso, Kuwait, Albania, Nigeria, Poland, Norway, Malaysia, Estonia, Yemen, Ireland. A advanced logistics chains and a partnership network assist us to ship our items anywhere in the globe as soon as possible without undermining product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |