We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226600500
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226600500, catch up with FAMAGA, the world's foremost company of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of goods and special attention to each consumer. We respect everyone, who liased with us - so, our regular buyers pick up the most flexible purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Eswatini, Vietnam, Mauritius, The Bahamas, Turkmenistan, China, Philippines, Kyrgyzstan, Brunei, Brazil, Netherlands, Qatar, Singapore, Bosnia and Herzegovina, Cyprus, Finland, United Arab Emirates, Pakistan, Senegal, Poland, Azerbaijan, El Salvador, Mauritania, Belarus, Comoros, Indonesia, Guyana, Dominica, Benin, Ireland, Algeria, Swaziland, Ecuador, South Korea, Slovakia, Nepal, Greece, Luxembourg, Egypt, Zimbabwe, Latvia. A well-elaborated logistics bond and a partnership network let us to deliver our goods anywhere in the globe as soon as possible without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is growing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To ask a question or book, contact us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |