We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226600300
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 30 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5226600300, communicate with FAMAGA, the world's influential vendor of mechanized equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of spare parts and private attention to each orderer. We praise everyone, who worked with us - hence, our regular consumers procure the most desirable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Dominican Republic, Mongolia, Albania, Myanmar, North Korea, Canada, Benin, Djibouti, Thailand, Mauritius, Austria, The Gambia, Estonia, Luxembourg, Burkina Faso, Peru, Poland, Equatorial Guinea, Swaziland, Andorra, The Bahamas, Madagascar, Indonesia, Nicaragua, Morocco, Georgia, East Timor, Croatia, Russia, Seychelles, Mexico, Philippines, Haiti, Denmark, Yemen, Ghana, Tajikistan, Rwanda, Guatemala, Latvia, United Arab Emirates, Dominica. A well-built logistics network and a partnership network guide us to send our goods anywhere in the globe promptly without damaging product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To get some advice or book, contact us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |