We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406603
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7472406603, catch up with FAMAGA, the world's major retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of items and individual attention to each customer. We appreciate everyone, who joined with us - therefore, our regular purchasers procure the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Italy, Austria, India, Armenia, Madagascar, Myanmar, Thailand, Peru, Turkmenistan, Argentina, Laos, Belgium, Angola, Gambia, Paraguay, Brunei, Libya, Croatia, Mongolia, Cyprus, Kuwait, Greece, Ecuador, Sudan, Central African Republic, Mozambique, Algeria, Azerbaijan, Morocco, Jordan, Nepal, South Korea, Czech Republic, Georgia, Equatorial Guinea, Andorra, Senegal, Ghana, Bosnia and Herzegovina, Kyrgyzstan, Slovakia, Indonesia, Kenya, Mauritius. A well-built logistics connection and a partnership network allow us to ship our units anywhere in the planet with no delay without disreputing product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as stay in control.
To request or order, call us by phone or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |