We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019813
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 15524 |
Stroke | 30 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412019813, reach FAMAGA, the world's main vendor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and individual attention to each purchaser. We admire everyone, who joined with us - therefore, our regular buyers procure the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Zimbabwe, South Korea, Poland, Guinea-Bissau, El Salvador, Papua New Guinea, Paraguay, Yemen, Mexico, Nigeria, Haiti, Angola, Liechtenstein, Costa Rica, Lithuania, Comoros, Namibia, Oman, Monaco, Madagascar, Chad, China, Japan, Jamaica, Sudan, Qatar, Guyana, Luxembourg, Bolivia, Uganda, Mauritius, Mongolia, Vietnam, Botswana, The Gambia, Belize, Cape Verde, East Timor, Morocco, Georgia, Egypt, Djibouti. A well-shaped logistics network and a partnership network guide us to deliver our goods anywhere in the planet on-time without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To inquire or order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |