We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822030219
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822030219, catch up with FAMAGA, the world's top producer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and special attention to each consumer. We cherish everyone, who worked with us - thus, our regular purchasers obtain the most beneficial purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Finland, Portugal, Antigua and Barbuda, Slovenia, United States, Sweden, Burkina Faso, Monaco, Switzerland, Colombia, India, Botswana, Norway, Japan, Honduras, Slovakia, Dominica, Iran, Estonia, Belarus, China, Philippines, Brunei, Albania, Montenegro, South Korea, Azerbaijan, Mauritius, Poland, Comoros, Tajikistan, Swaziland, Croatia, Afghanistan, Indonesia, Panama, Angola, Kiribati, Syria, Uruguay, Cyprus, Turkey, Latvia, East Timor, Samoa, Denmark. A well-built logistics chains and a partnership network assist us to send our units anywhere in the earth promptly without disreputing product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |