We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063105
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822063105, catch up with FAMAGA, the world's main retailer of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outcomes and particular attention to each customer. We praise everyone, who conspired with us - thus, our regular customers receive the most attractive purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Papua New Guinea, Sri Lanka, Mexico, Turkmenistan, Nigeria, El Salvador, Brunei, Colombia, Guinea, Suriname, Panama, Ireland, Angola, Hungary, Madagascar, Moldova, Netherlands, Iran, Japan, Singapore, South Korea, Morocco, Belarus, Peru, Grenada, Comoros, Bosnia and Herzegovina, Sweden, Ukraine, Saudi Arabia, Dominica, The Gambia, Mauritius, Liechtenstein, Cameroon, Albania, Malta, Haiti, Fiji, Botswana, Cape Verde, Chile, Cyprus, Malaysia, Pakistan, Georgia, Zimbabwe, Norway, Afghanistan, Mali. A advanced logistics connection and a partnership network assist us to ship our products anywhere in the globe as soon as possible without undermining product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is growing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To consult or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |